CCEI
Limpido Z2
v1.0
Page 4
P
ROBE INSTALLATION
The probe allows pH measuring. The electrodes that constitute it, supply a low electrical voltage. This is a
fragile and sensible element of perturbation.
This is electronic equipment and should be handled with
care to prevent damage to the unit.
Suction
strainer
to
immerse on the tank of
correction fluid (PH- or
PH+)
Use the clamp saddles.
Screw injector on the
TEFLON clamp.
Connect the probe.
To connect to the pool, use clamp
saddles, probe support and probe. All
screwings must be done with TEFLON.
Probe adjustment part
on the pipes. Use the
TEFLON to screw this
part
on
the
clamp
saddle.
Clamp saddle to be
located on the pipes.
Electrodes
Clamping
ring of the
probe
pH
CELL
Connector
COVER
Connector
PH Probe
Connector
