ccei Brio WiL Technical Instructions Download Page 2

Page: 2 / 10

Technical instructions

Brio WiL

v1.3EN

1. Pack contents

• 1 Brio WiL with 3 feet (1.5m) of 3x2.5mm² pre-fitted cable

• 1 bag containing 2 screws, 2 wall plugs and 3 rapid connectors (2 x 3 pts + 1 x 5 pts)

• Technical instructions (this document)

2. Technical support

USA: na.ccei-pool.com/us / Tel: +1.213.425.5280

Canada: na.ccei-pool.com/ca / Tel : +1.514.963.4226

3. Warnings

This product must be installed by an approved or certified electrician or a qualified
pool professional in compliance with the National Electrical Code (CEX), NFPA
70 or the Code Canadien de l'électricité (CCE), CSA C22.1. All local installation
codes and by-laws must also be respected. Incorrect installation creates electrical
hazards which can lead to death or serious injury for users, installers and other
persons from electric shocks, and can also lead to damage to the power source.
Always disconnect power at the circuit-breaker board before installation. Failure
to do so can lead to death or serious injury for people using the swimming pool,
installer and other persons from electrical shocks.

For countries which comply with the regulations of the International Electro-tech-
nical Commission (IEC): Light fittings must be installed by an approved or certi-
fied electrician or a pool maintenance professional, in compliance with the current
IEC 364-7-702 standard and all local applicable codes and by-laws. Incorrect in-
stallation creates electrical hazards which can lead to death or serious injury for
users, installers and other persons from electric shock, it can also lead to damage
of the property.

4. Technical data

Power voltage

12V ~ AC or 24 VDC 50/60Hz (depending in-
stallation, see section 6)

Power consumption

5W maximum

Switching power (lights connected)

120W @ 12VAC or 60W @24VDC

Index of protection

IP-55

Dimensions

72 x 139 x 36 mm 2.5 x 5.5 x 1.6 in.

Installation