CBX ANOKI, User Manual, Page: 8 / 19

8
6
Install safety harness into the corresponding backrest slots.
7
Put the cloth cover on the seat back.
INSTRUCTIONS
Make the elastic band through the seat (4 places in all).
8
Press the button on the tray, and insert it into the corresponding slot, then push forward.
10
Fasten the elastic band onto the seat (4 places in all).
9
Take off the screws first, and then assemble the footrest, and lastly tighten screws.
11
A five point harness is provided to restrain your child. Sliding adjusters are fitted as shown and
should be carefully adjusted on each side so the harness fits your child comfortably. To fasten the
harness push clips into buckle. To unfasten push clips in and remove from buckle.
14
Adjust height:
Lift, press and adjust both height adjustment handles. Squeeze buttons. Adjust height to any of
six positions.
15
Recline adjustment:
Grasp the handle at back of seat. Lift handle. Set seat down in any of three recline positions.
12
Depress the button underneath to adjust the tray. lt has 3-position adjustments.
13
Important — Keep these instructions for future reference.
Warnings, safety instructions, maintenance, disposal and guarantee can be found in the warnings
booklet.
Install safety harness into the corresponding backrest slots.
5
2
Pull down the knobs at both sides and open it as figure show. After insert the fixed end into the
mounting hole. Same installation for the other side.
Leg assemblies: slide both legs on to upper legs. Do not click into place until both legs have been
partially inserted. Push lower legs until they click into place. Confirm the pins emerge completely
through holes. Repeat for other side.
3
Depress the backrest button, then insert seat into the slot. The backrest has 3-position adjustments.
1
Install safety harness into the corresponding seat slots.
4
Tray storage: Conveniently hang tray on back crossbar.
16