RSA-138A
Installation and Operation
5
3
Adjustments
The RSA comes adjusted from the factory to fit most common configurations, and should not need to be adjust-
ed in most cases. However, if adjustments do need to be performed, it is recommended that they be done on
de-energized and isolated equipment to prevent possible damage or injury.
3.1
Locator Adjustment
The depth of the handle locator on the RSA can be adjusted in order to avoid interference from items mounted
to the switchgear door.
1.
Loosen the two bolts on the locator plate, as shown below.
2.
Slide the locators up or down as necessary to position them flush to the upper and side edge of the han-
dle escutcheon.
3.
Re-tighten the four bolts.
