RSA-138A
Installation and Operation
4
2
Operation
A
TTENTION
!
Please ensure that all cables are clear of moving parts. Failure to do so may result in damage to
cables and/or actuator.
A
TTENTION
!
Please ensure that the batteries to the RSO-I AR are fully charged or that the unit is plugged into
AC power.
For detailed instructions on the operation of the RSO-I AR please see the RSO-I AR Manual.
1.
Ensure that the RSA is properly installed. See Section 3
for detailed instructions.
2.
Plug the RSO-I AR into the motor control box.
3.
Exit the arc flash boundary
4.
Turn the power switch on the RSO-I AR to the ON posi-
tion.
5.
Ensure that the Auto Retract (AR) function is OFF
6.
If the breaker is CLOSED and needs to be opened, press
and hold the TRIP button on the RSO-I AR until the
breaker is tripped.
7.
If the breaker is OPEN and needs to be close, press and
hold the CLOSE button on the RSO-I AR until the
breaker is closed.
