RRS-4 Technical Manual 7/20/2011
5.1 Breaker Names
Once gaining access to the Breaker Names screen, you may now change or add names
of breakers stored in the RRS-4 unit. Navigate with the up and down arrow keys or
simply press on the breaker name of your choosing. Once the required breaker or create
breaker is selected press the bottom enter arrow key "
".
1.
Type 1
– Indicates breaker in the list selected. (I.e. breaker name Type 1 is the
corresponding breaker information for GE 1200.)
2.
Up Arrow
– Navigates the cursor up the list
3.
Down Arrow
– Navigates the cursor down the list
4.
Esc
– Navigates the operator back to previous screen
5.
Exit
–Exits the Breaker Names screen
6.
Left Arrow/ Enter
– Selects highlighted option chosen by the operator
After a breaker name is selected, the operator will be navigated to a screen with
a touch-keyboard allowing modifications to the breakers name. When finished,
press enter to return to the main Breaker Names screen. To leave Breaker
Names, use the down arrow (figure 18.3) to scroll down to “Exit”. Once “Exit” is
highlighted, press the enter arrow (figure 18.6) to select “Exit” and navigate back
to the main screen display.
Figure 18: List of entered breaker names
1.
5.
2.
3.
4.
6.