fuel
CREDENZA
Made in Vietnam - r06
Page 5 of 5
For added safety and stability, it is recommended that the wall mounting hardware be installed. For
safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall,
concrete, etc.). Mount to wood studs whenever possible.
A) Attach
mounting bracket
to top of unit using 2
small screws
.
B) Determine the final location of unit. Mark position on the wall, approximately 2" below the
mounting bracket mounted to the back of the unit.
C) Drill a hole in the wall stud. If the wall stud is not available, drill a hole in the wall that is slightly
smaller in diameter than the anchor. Gently tap the
plastic anchor
until the flange of the anchor is
flush with the wall.
D) Attach the
mounting bracket
to the wall by inserting 2
large screws
through the mounting
bracket and into the wall anchor in the wall.
E) Place the unit so the mounting bracket on the back edge is allowed with the wall bracket.
F) Lace one end of the
wall strap
through both brackets, and into the other end of the strap.
G) Pull the strap tightly until secure.
Repeat step A-G for remaining wall mounting assembly.
Wall mounting assembly is now complete.
NOTE:
If you are unsure about your wall type or what
mounting method you should use, consult a
qualified professional or your local hardware store.
wall mounting assembly
A
C
D
small
screw
mounting
bracket
plastic
anchor
large
screw
wall
strap
mounting
bracket
WALL
Customer Service
800.606.6252
| Latest instructions available at
www.cb2.com
