fuel
CREDENZA
Made in Vietnam - r06
Page 2 of 5
1
2
A. Insert 4
wood dowels
and 2
cams
into
left
and right side panels
as shown. Make sure
arrows on each
cam
points toward nearest edge
with holes.
B. Insert 4
wood dowels
and 2
cams
into
partition
as shown.
3
4
Insert 6
cam screws
into
top panel
as shown.
Secure, but do not over tighten, screws using a
phillips head screwdriver.
Slide
back panel
into corresponding grooves of
left/right side panel and top panel
as shown.
Fit dowels of
left/right side panels and partition
into corresponding holes of
top panel
as shown.
Using a screwdriver, turn each
cam
clockwise
until it securely engages each cam screw.
A
partition
NOTE: Make sure arrows
on each cam points toward
nearest edge with holes
B
left and right
side panels
top
panel
right side
panel
top panel
left side
panel
partition
back
panel
NOTE: Do not over
tighten the cam screws
NOTE: Make sure grooves
of side and top panels are
assembled on the same side
Customer Service
800.606.6252
| Latest instructions available at
www.cb2.com
NOTE: Make sure
arrow label on partition
points toward the front
during assembly
