fuel
CREDENZA
Made in Vietnam - r06
Page 3 of 5
5
6
7
8
A. Attach 4
feet (2A, 2B)
to
bottom panel
with 3
large bolts
per foot as shown, using a screwdriver.
B. Attach 1
support foot
to
bottom panel
with 2
small bolts
, 2
spring washers
and 2
flat washers
.
A. With the assistance of another adult, position
unit upright as shown. Insert 8
shelf supports
at
desired shelf heights.
B. Place 2
adjustable shelves
into assembled
unit. Make sure shelves are securely supported by
each shelf support.
Fit dowels of
left/right side panels
and
partition
into corresponding holes of
bottom panel.
Secure
bottom panel
to
left/ride side panels
and
partition
with 6
small bolts,
6
spring washers
and 6
flat washers,
using a
phillips head
screwdriver.
Do not over tighten the bolts.
NOTE: Do not over
tighten the bolts
NOTE: Do not over
tighten the screws
Customer Service
800.606.6252
| Latest instructions available at
www.cb2.com
adjustable
shelf
foot A
bottom panel
NOTE: Make sure groove of
bottom panel is assembled
towards back panel
support
foot
A
B
A
Fit 2
hinges
into corresponding holes of 2
left and
right doors
as shown. Secure each hinge with 2
small screws
, using a screwdriver.
hinge
left and right
doors
A
B
A
B
foot A
foot A
foot B
foot B