Place all supplied parts and required hardware on a flat, stable surface and verify the
presence of all supplied parts listed on Page 4.
Carefully remove the white plastic protective coat from the chimney covers and range hood.
NOTE: To avoid damage to your hood, prevent debris from entering the vent opening.
Determine and mark the center line on the ceiling where the range hood will be installed.
Make sure there is proper clearance within the ceiling or wall for exhaust vent.
A straight, short vent run will allow the hood to perform more efficiently.
Try to avoid as many transitions, elbows, and long run as possible. This may reduce the
performance of the hood.
IMPORTANT: Before fastening any surfaces together, remove any protective cover from that
surface; remove the remainder of the protective coating after installation completion.
Use silver tape or duct tape to seal joints between pipe sections.
For installing under the cabinet with recessed bottom, attach 4-inch wide wood filler strips
Advanced Preparations:
3.
4.
Preparations:
1.
2.
3.
4.
5.
6.
(not provided) on each side. Refer to Figure 1.
7.
Using references in
Measurements and Diagrams
on Page
17
, create access opening for
electrical wires and hood exhaust under the cabinet.
CAUTION: If moving the cooking range is necessary to install the hood, turn OFF the
power on an electric range at the main electrical box. SHUT OFF THE GAS BEFORE
MOVING A GAS RANGE.
Puncture the knockout holes (for mounting under the cabinet) on the hood as shown in
Figure 2.
If necessary, attach two rubber stands with 3M adhesive tapes to the back corners of the
hood.
8.
9.
Pg 9
Preparation
Figure 2
Figure 1
Severe Injury
Rotating fan can cause severe
injury. Stay clear of fan when
power is present.
Familiarize yourself with the controls of the range hood by
reading through Range Hood Operations, Page 13.
Place the range hood on a flat, stable surface. Connect the
range hood to a designated standard outlet (please refer the
product label for the suitable voltage of this unit) and turn
on the range hood. Verify all operations of the range hood
by referring to Range Hood Operations, Page 13.
1.
2.