Catler TM 8010, Instructions For Use Manual

Page: 26 / 34

25
25
25
25
CARE AND CLEANING
CARE AND CLEANING
Ensure the Tea Maker is turned OFF by pressing
the TEA|Cancel button (when brewing tea) or the
HOT WATER|Cancel button (when heating water)
on the Power Base. The Tea Maker is OFF when
the button surround illumination goes out. Re-
move the power plug from the wall outlet.
NOTE:
Allow all parts of the Tea Maker to cool
completely before disassembling and
cleaning.
NOTE:
Only the Jug Lid, Tea Basket, Tea Basket
Lid and Tea Scoop are dishwasher safe.
WARNING:
NEVER IMMERSE THE BASE OF THE
GLASS JUG, POWER BASE, POWER CORD
OR POWER PLUG IN WATER OR ALLOW
MOISTURE TO COME IN CONTACT WITH
THESE PARTS.
Cleaning the Jug Lid and integrated
scale i lter
1. Wash the Jug Lid in warm soapy water with
a soft sponge, rinse and dry thoroughly. The
integrated scale filter can be cleaned by
placing under running hot water and rub-
bing with a cleaning cloth or brush.
2. Alternatively, the Jug Lid is dishwasher safe.
Position the Jug Lid vertically so the scale fil-
ter is facing upwards. This will allow water to
drain properly.
3. Wipe the exterior of the Glass Jug with a soft
damp cloth to clean.
Cleaning the Glass Jug
1. After each use, empty the Glass Jug. Do not
allow brewed tea to stand overnight.
2. Wipe the interior of the Glass Jug with a soft
damp sponge or rinse with warm water.
Tea deposits will enhance the flavour of the
brewed tea, so if only using as a Tea Maker
do not wash with soapy water.
3. Wipe the exterior of the Glass Jug with a soft
damp cloth to clean.