24
CARE AND CLEANING
the rear cover.
If the steam jet is still blocked, unscrew the
steam jet end and clean it again using the
cleaning aid needle. Wash the steam jet end
under running water or have it soaked in
warm water overnight.
THOROUGH CLEANING OF THE
BREW HEAD
Deposits of coffee oils may gather in the
brew head during use and adversely affect
the appliance operation as well as the taste
of the coffee drink being brewed. Therefore,
cleaning the brew head is required on
regular basis. Depending on the frequency
of use, the brew head must be cleaned
thoroughly every 3 months.
Preparation
1. Remove the water tank and fill it
with fresh water up to the maximum
level mark. Insert the tank back in the
appliance.
2. Remove the drip tray and the grille and
empty the tray. Insert the tank back in
the appliance.
3. Insert the 2-cup strainer and then the
cleaning strainer in the handle. (The
cleaning strainer is located on the rear
cover inner wall along with the cleaning
aid).
4. Insert one cleaning capsule in the
cleaning strainer, then insert the handle
in the brew head.
5. Place a sufficiently large container under
the handle.
NOTE
Use only cleaning capsules designed
for cleaning espresso machines.
Starting the cleaning cycle
1. Insert the mains cord plug into a power
socket.
2. While holding down the
and
button, press the
POWER
button briefly.
When the indicator lights start to turn on
from left to right, release the
and
button.
3. The cleaning cycle will start. The indicator
lights will turn on from left to right
during the entire process. The cleaning
process takes about 10 minutes.
4. When the cleaning process is finished,
the indicator lights will turn off and an
acoustic signal will sound 4 times. The
POWER
,
MANUAL
and
indicator
light will then turn on, which means the
appliance is ready for use.
5. Remove and empty the container.
6. Remove the handle from the brew head.
7. Remove the cleaning strainer and wash
it under hot running water. Wipe the
cleaning strainer dry and put it back in
place inside the appliance back cover.
8. Remove the 2-cup strainer and wash it
thoroughly along with the handle under
hot running water. Dry clean.
9. The appliance is now ready for use.
NOTE
During the cleaning process, other
appliance functions are disabled. If
you need to stop the cleaning process,
unplug the power cord from the
socket.
REMOVING LIMESCALE DEPOSITS
During regular use, water may cause build-
up of limescale on most internal parts of the
coffee machine, thus reducing the water
flow, coffee machine performance and also