Catler ES 8014 Instruction Manual Download Page 14

12

FEATURES OF YOUR ESPRESSO ES 8014

FEATURES OF YOUR ESPRESSO ES 8014

Two pumps and two thermoblocks

The appliance is equipped with two Italian 
pumps: A 15-bar pump to brew coffee and 
a 4-bar pump to dispense steam. The 15-bar 
pumps provides sufficient pressure to ensure 
complex coffee extraction including healthy 
oils and aromatic substances. The second 
4-bar pump is designed exclusively for steam 
dispensing, producing a constant steam 
amount for you to get silky, thick milk with 
rich texturing.
Two independent thermoblock systems are 
equipped with a stainless steel and brass 
layer. They heat water in the inner system to 
guarantee that accurate temperature will be 
always reached when selecting a function 
without having to wait for the water heating 
to finish. In addition, they reduce the 
temperature fluctuation in the inner system.

Simultaneous milk dispensing and 
texturing

Thanks to the dual pump and dual 
thermoblock system, you will be able 
to extract coffee and texture milk 
simultaneously. This is a system commonly 
used in professional coffee machines.

Pressure gauge and wizard

The pressure gauge is equipped with 
a simple wizard to tell you immediately if the 
coffee is being brewed at an ideal pressure.
If the gauge line reaches the central sector, 
the coffee is being brewed at an ideal 
pressure. However, if the gauge line stays 
under the central sector, we talk about the 
so-called under-extracted coffee. On the 
other hand, if the gauge line reaches above 
the central sector, we talk about the so-called 
over-extracted coffee.
In order to always reach an ideal pressure, 
it’s necessary that coffee grinding level, 
ground coffee amount in the strainer and 

coffee tamping force should be correctly 
combined.

Tip:

 We recommend to use only fresh ground 

coffee.

Brew head and handle

The brew head, handle and strainers are 
designed just like they are in professional 
coffee machines. In addition, they are 
equipped with stainless steel and brass 
to guarantee strength and durability. All 
of these component help to brew coffee. 
The strainers are big enough for you grind 
necessary amount of coffee in them. The 
brew head can then spread the pressure 
uniformly for you get an ideal coffee brewing 
pressure.

Control panel

The control panel allows you to operate your 
appliance quickly and easily. It provides both 
manual control as well as programming the 
coffee dispensing time. Though the preset 
volume is 35ml/cup, you can adjust the 
coffee dispensing time and save it to the 
memory with the easy control.

Pre-infusion

The pre-infusion feature is automatically 
included in the coffee brewing procedure 
using the MANUAL, 

 buttons. This is 

done by moistening the ground coffee in the 
strainer before the brewing itself. This will 
make the aroma release in full during the 
coffee brewing, enriching the brewed coffee 
with essential substances.

Anti Calc filter

The Anti Calc filter reduces the amount 
of deposits that may degrade water taste 
and smell which significantly affects also 
the brewed coffee. In addition, it prevents 
the formation of calcareous deposits, thus 

Summary of Contents for ES 8014






























Reviews: