If you have power sensors
When a signal is received from a paired power sensor, power is displayed as one of the
current functions.
Strada Smart
Power
Power-saving mode
Strada Smart
If there is no sensor signal nor button operation for 10 minutes, the power-saving screen is
activated. If such a state continues for a further hour, the sleep display is activated.
The power-saving screen returns to the measurement screen when the bicycle starts
moving.
When left
for
approx. 10
min
When left for
approx. 60 min
Power-saving screen
Measurement
screen
Sleep
* Heart rate and cadence data will not be displayed unless each sensor is paired.
*Average values are displayed as
.E
instead of the measurement value when Elapsed
Time exceeds approximately 27 hours. Average speed is also displayed as
.E
instead of
the measurement value when Trip Distance exceeds 1,000 km [620 mile].
Reset Strada Smart and start measurement again to enable average value
measurement.
Summary of Contents for Strada Smart CC-RD500B
