Checking package contents
Setup
Setup with smartphone
Setup uses the Cateye Cycling™ smartphone app (free).
1. Install Cateye Cycling™.
Access the App Store, search for "Cateye Cycling", and install the app.
If using an Android smartphone
Access Google Play, search for "Cateye Cycling", and install the app.
for information about model recommended for use with Cateye
Cycling™.
2. Launch Cateye Cycling™.
Follow the on-screen instructions and allow the use of GPS and Bluetooth® devices.
Once basic settings are complete the Trip screen appears.
3. Pair Strada Smart with sensors.
When the smartphone's Bluetooth settings are turned on, it will search for devices, but
do not configure settings at this stage. Switch to Cateye Cycling™ and follow the
procedure below.
Important
• Pairing (sensor ID synchronization) must be performed in order to use Strada Smart
and sensors.
• Do not pair sensors at a race venue or in similar locations where there are many other
users. Doing so may cause Strada Smart to be paired with another device.
Important
From
(MENU) at the top left of the screen, turn on [Connect], and then tap [Device].
Smartphone
Summary of Contents for Strada Smart CC-RD500B
