Cateye Air GPS, Instruction Manual

Page: 19 / 46

Cover,
Introduction
Setup
Mounting on a
bicycle
Starting
measurement
Measurement
results
Changing settings/
Using sensors
3
4
1
2
Frequently
Asked
Questions
Appendix
5
SET
2/13
Changing settings/
Using sensors
19
Changing settings of the Air GPS and sensors
Item Description
Display
Customization
Change what to display on the middle and lower displays of
the measurement screen.
Backlight
(Night Mode)
Configure when to start and end backlight illumination.
When Night Mode is enabled, the backlight will be on for the
time period selected.
* When automatic display illumination is turned on, the time is
automatically adjusted according to the sunset and sunrise times.
* If automatic display illumination is turned off and the same time is
entered in ON time and OFF time, the backlight will always be ON.
Data Auto Delete
When enabled, this function automatically deletes exported
trip data from the Air GPS.
GLONASS
Select whether to use the GLONASS positioning system in
addition to GPS for acquiring position information.
Using GLONASS will provide more accurate position
information, but battery consumption will increase.
Select a sensor
Select a sensor to use when multiple sensors of the same
type are paired with Cateye Cycling™.
* When only one sensor of any particular type is paired,
[Select a sensor] is not displayed.
One sensor each for speed, cadence, and heart rate can
be used with the Air GPS.
* Speed/cadence sensors are classified as speed sensors.
Recording Interval
(GPS CC)
Select the log interval for recording on the Air GPS.
Reset Trip
Distance 2
Reset the value of Trip Distance 2 to zero.
* Selectable while a smartphone is connected to the Air GPS.
Total Distance
Enter the total distance.
* If a new value is entered, the total distance will be changed.
* Selectable while a smartphone is connected to the Air GPS.
* In the case of the mileage setting, the entered value and
the value displayed on the Air GPS may differ slightly.
Firmware
Check the current firmware version and update the firmware
to the latest version available.
* Selectable while a smartphone is connected to the Air GPS.
* If firmware update is started during measurement,
measurement will be terminated and saved.
* Please do not press any button on the Air GPS while
updating the firmware.