688151-2 en ma 2012
9
TROUBLE SHOOTING:
SYMPTOM POSSIBLE
REASONS
SOLUTION
REMARK
No power to
machine
• Plug is not in.
• Insert plug into mains socket
• Main switch is not on the “I”
position.
• Switch main switch to “I”
position.
• Power cord is broken.
• Replace power cord
Ask for
authorized
service
department
to check and
repair it.
• Main switch is broken.
• Replace main switch
Machine is not
cooling
• Compressor does not start
• See “compressor does not start”
section.
• Gas leak into the cooling circuit.
• Find leak, fi lter it out and
re-charge the cooling circuit
• Condenser is clogged.
• Clean the condenser
• Fan motor is burnt.
• Replace fan motor
• Lack of air fl ow
• Increase distance between the
machine and other obstacles/
heating sources
Compressor
does not start
• Main switch is broken
• Replace main switch
Ask for
authorized
service
department
to check and
repair it.
• Compressor protector is broken. • Replace compressor protector
• Compressor relay is broken
• Replace compressor relay
• Compressor motor is broken
• Replace motor
One tank is not
cooling
• Gas leak into the cooling circuit
• Find leak, fi lter it out and re-
charge the cooling circuit
• Condenser is clogged
• Clean the condenser
• Lack of air fl ow
• Increase distance between the
machine and other obstacles/
heating sources
• Tube of the cooling circuit is
clogged.
• Cut the tube, eliminate clog,
re-charge the cooling circuit
• Filter is clogged
• Replace the fi lter
The mixing
paddles are not
working
• The mixing motor is broken
• Replace the mixing motor
The pump not
working
• The pump motor is broken
• Replace the pump motor
• The pump switch is broken.
• Replace the pump switch
WARNING: IF THE APPLIANCE HAS ANY PROBLEM OR HAS BEEN DAMAGED, DO NOT TRY TO REPAIR OR
REPLACE IT BY YOURSELF. PLEASE ASK FOR THE AUTHORIZED SERVICE DEPARTMENT FOR HELP.
