14
15
5. Part list
1. Handle
2. Auxiliary handle
3. Blade screw and washer
4. Saw blade
5. Motor housing
6. Blade guard
7. Gripping surface
8. Cutting angle locking lever
9. Cutting depth locking lever
10. On-off switch
11. Lock switch
12. Blade guard lever
13. Motor housing ventilation slots
14. Base plate
In extreme overloads for a long time, the engine may become too hot.
To protect the engine from overheating (it can burn) it has a electronic temperature
monitoring.
Before the critical engine temperature is reached, the safety electronics disconnect
the engine.
After about 3-5 minutes the engine has cooled and you can use the saw again.
Lowering the engine (idle speed and rest speed) reduces this time significantly.
4. TEMPERATURE PROTECTION
