PLASTIC
NON-FERROUS
METAL
LIGHT BUILDING
MATERIAL
S
12
13
Risk of accident if the machine is operated using unauthorised voltages
or frequencies. The main voltage and the frequency of the
power source must correspond with the specifications on the machine’s
name plate.
Always pull the plug out of the socket before performing any type of work
on the machine.
Switch on the machine
Press the safety button to be able to start the saw. Hold the safety button
and press the on-off switch to start the saw.
The on-off switch cannot be locked in position. If you release the on-off
switch the machine will switch off.
2. OPERATION
3. USEAGE
The machine is intended for lengthways and crossways cutting of wood with
straight cutting lines as well as mitre angles to 45° while resting firmly on the
work piece.
If you use a suitable saw blade can you cut in non-ferrous metal, light building
materials, and some plastic.
The user alone is responsible for any liability ties caused by usage other
than intended. Persons under 16 are not permitted to use the power tool.
