TOOLS
26
27
• The unit should be stored in a dry place where it is protected against freezing.
• With each changing of the saw blade, remove deposited saw dust from the
inside of the protectiveguard.
After an operating period of approx. 200 hours, the following main-
tenance work must be performed:
1. Check the motor brushes and replace if necessary, clean the motor housing.
2.
Renew the grease filling of the gear box.
15.2. Storeage
Always pull the plug out from the socket before doing any type of work on the ma-
chine.
All maintenance and repair work which requires
the motor housing to be opened, must
only be carried out by an authorised service
workshop.
Contact manufacturer for service workshops or find the nearest workshop at
http://www.catapult.com/service
Only use original Catapult Power Tools parts.
15. MAINTENANCE
15.1. Cleaning
