Catalyst 180-R, Assembly Manual, Page: 60 / 74

STEP 15
Parts Required:
1 X Antenna Mount (Black 3D Printed TPU)
2 X Antenna Tubes (Blue Plastic 1/8” Diameter)
2 X Antenna Mount Inserts (Silver Aluminum M3 Hole x 4.5mm OD x 5mm long)
2 X Socket Head Screw (M3 x 12mm long x
blue 7075 aluminum )
1 X FPV Antenna (Sold Separately)
Assembly Process:
Press the Antenna Tubes into the Antenna Mount as shown. Press in the Antenna Mount Inserts as shown. Feed your
receiver's antenna wires up through the bottom mount holes and install the mount as shown. Use the two Socket Head
Screws to hold the assembly in place. Finally, install your FPV antenna.