Cata CME6106, Operating And Maintenance Instructions Manual

Page: 71 / 112

Example 2: Setting the end cook function
The time is 15:30 now, and you want to finish the cooking at 17:30.
Press “ ” till the and “12” on the timer are blinking. Use to adjust “12” to “17”, and press “ ” again, the minute digit “00”
starts to blink. Then use to adjust “00” to “30”, then press “ ” again, the end cooking time is set.
Turn the oven to your desired cooking function and temperature, the oven starts to work, the display shows 15:30, and starts to
accumulate time, and the and lights will be on ( light may go off from time to time).
When 17:30 is reached, oven stops, and the will starts to blink with alarm warning ten times and the indicator will be off.
Press any key to get out of this setting, and the will light up.
Example 3: Setting delayed cooking
It’s 8:00 now, and you want to finish the cooking at 16:00, and cooking time needs to be 45 minutes.
Press “ ” to set the cooking time length to 45 minutes as per above example. Press “ ” again, the and “12” on the timer start
to blink. Adjust the timer to 16:00, and press “ ” again to confirm it. The display goes back to the current time. Then turn the oven
to your desired cooking function and temperature.
The oven starts to work automatically at 15:15, and the , , and lights will be on ( light may go off from time to time).
At 16:00, the oven will stop working, both and lights start to blink and the alarm will warn ten times and the indicator
will be off. Press any key to get out of the setting, and the will light up.