Cata CMD 8108 X, Installation, Use And Maintenance Instructions

Page: 30 / 37

10. Cooking mode knob.
11. Temperature knob.
12. Temperature indicator.
13. Timer
10. Cooking mode knob.
11. Temperature knob.
12. Temperature indicator.
13. Timer
C
B
Control panel with 3 knobs automatic stop
Control panel with 3 knobs
1. Rotate the cooking mode knob (10) to a desired cooking mode.
2. Rotate the temperature knob (11) to a desired cooking temperature.
3. The oven is switched on and the operation is started as long as the TIMER (13) is in the manual position
4. If desired, set the automatic stop, turn the knob clockwise until the desired time is reached. After that time, the cooking process
will stop and the buzzer will sound.
5. After cooking:
• Set the temperature knob (11) to position.
• Set the cooking mode knob (10) to position.
1. Rotate the cooking mode knob (10) to a desired cooking mode.
2. Rotate the temperature knob (11) to a desired cooking temperature.
3. The oven now switches on and starts operation. The power indicator (13) and temperature indicator (12) light up.
4. Once the thermostat controls are in the desired position, turn the knob clockwise to the maximum position and then turn it
anti-clockwise to the desired time; at the end of this set time the buzzer will sound. The timer only indicates the end of the set
time, but it does not stop the function being used.
5. After cooking:
• Set the temperature knob (11) to position.
• Set the cooking mode knob (10) to position.
10 13 11
12
10 13 11
12