CASUALPLAY BiCare FIX, Instructions Manual

Page: 22 / 80

22
straps should not be too tight or too loose.
IMPORTANT: Make sure that the harness straps are not twisted.
Installing the Bi Care Fix
Installing the Bi Care Fix as Group 0+ (0-13 kg)/ Group l (9-18 kg). Facing backwards
• Place the Bi Care Fix base on the vehicle seat, and pull the ISOFIX connectors out (fig.04).
Consult the section referring to adjusting the ISOFIX connectors.
• Fasten the ISOFIX connectors of the base to the ISOFIX anchors of the vehicle seat, and
make sure that a green indicator appears on both ISOFIX connectors of the base (fig.05).
Press the base against the vehicle seat, to finish fitting it.
• Adjust the height of the support bar (fig.03), to do this consult the section on adjusting the
length of the support bar.
• Release the seat locking system, and position the Bi Care Fix seat facing backwards.
• To lock the seat to the base, press the seat locking button (red button). The Bi Care Fix
fastener indicator will turn green (fig.14).
• Place the child in the Bi Care Fix seat and fasten him in with the harness. Consult the section
on adjusting the harness to correctly secure the child in the Bi Care Fix.
NOTE: If the Bi Care Fix is installed as group 0+, only the reclining position 3 can be used.
WARNING: Make sure that the seat is correctly fastened to the base.
Installing the Bi Care Fix as group 1 (9-18 kg) Facing forwards
• Place the Bi Care Fix base on the vehicle seat, and pull the ISOFIX connectors out (fig.04).
Consult the section referring to adjusting the ISOFIX connectors.
• Fasten the ISOFIX connectors of the base to the ISOFIX anchors of the vehicle seat, and
make sure that a green indicator appears on both ISOFIX connectors of the base (fig.05).
Press the base against the vehicle seat, to finish fitting it.
• Adjust the height of the support bar (fig.03), to do this consult the section on adjusting the
length of the support bar.
• Release the seat locking system, and position the Bi Care Fix seat facing forwards (fig.03).
• To lock the seat to the base, press the seat locking button (red button). The Bi Care Fix
fastener indicator will turn green (fig.15).
• Place the child in the Bi Care Fix seat (fig.16), and fasten him in with the harness.
• Consult the section on adjusting the harness to correctly secure the child in the Bi Care Fix.
WARNING: Make sure that the seat is correctly fastened to the base.
Fitting/removing the upholstery
• Place the Bi Care Fix backrest in position 3, and take the seat off the base.
• Pass the plate that fastens the buckle to the seat, through the frame and the upholstery
(fig.17).
• Unfasten the Velcro on the backrest and take the upholstery off the seat.
• Next, undo the two zips on the headrest and take off the upholstery that covers it.