ECO DESIGN INFORMATION
TECHNICAL DATA
A
Manufacturer name and address
B
Product name
C
Product part number
D
Serial number:
X Production plant
YY Year of production
xxxxxx Progressive number specific for each machine
EFFICIENCY AND CONSUMPTION
The equipment has been designed in order to comply with the Directive 2009/125/EC and the Regulation
2019/1784/EU.
Efficiency and idle power consumption:
PART NUMBER
99820
PRODUCT NAME
'(5%<
EFFICIENCY WHEN MAX POWER CONSUMPTION
81,00%
IDLE POWER CONSUMPTION
20W
EQUIVALENT MODEL
No equivalent model
The value of efficiency and consumption in idle state have been measured by method and conditions defined
in the product standard EN 60974-1:20XX.
TYPICAL GAS USAGE FOR MIG/MAG EQUIPMENT
DC electrode positive
Material type
Wire
Diameter
mm
Current
(A)
Voltage (V)
Wire
Feeding
[m/min]
Shielding Gas
Gas
flow
[l/min]
Carbon, low alloy steel
0,8 ÷ 1,2
40 ÷ 280
15 ÷ 30
1,0 ÷ 25
Argon 80% CO
2
20% 10 ÷ 18
Aluminium
0,8 ÷ 1,6
15 ÷ 300
14 ÷ 29
2,0 ÷ 25
Argon
14 ÷ 22
Stainless steel
0,8 ÷ 1,2
30 ÷ 260
15 ÷ 28
1,8 ÷ 12
Argon 98% CO
2
2%
8 ÷ 16
Copper alloy (Bronze)
0,8 ÷ 1,2
40 ÷ 250
14 ÷ 30
2,5 ÷ 11
Argon
12 ÷ 16
TIG PROCESS
In TIG welding process, gas usage depends on cross-sectional area of the nozzle. For comonnly used
torches:
Helium = 14-24 l/min
Argon = 7-16 l/min
Notice
: Excessive flow rates causes turbulence in the gas stream which may aspirate atmospheric
contamination into the welding pool.
Notice
: A cross wind or draft moving can disrupt the shielding gas coverage, in the interest of saving of
protective gas use screen to block air flow.
END OF LIFE
At end of life of product, it has to be disposal for recycling in accordance with Directive 2012/19/EU
(WEEE).
Summary of Contents for Derby 182
