1
1
1
1
To enter private alarm sequence contacts
After you select the
PRIVATE
option, the display will show the details for the
first of up to ten alarm sequence contact entries (numbered
0
to
9
):
4 Either press the top right soft button to move to the next entry or press the
ENTER
soft button to edit the current entry. You can now edit the
PHONE NO
for this entry. This is the telephone number that will be dialled during an alarm.
• IMPORTANT: Do not enter any spaces within the phone number.
• Use the top corner keypad to add the required phone number.
• If required, use the large green C (cancel) button to erase digits.
5 Press the
STORE
soft button to save the phone number and edit the
ATTEMPTS
value. This is the number of times in succession that the phone
number for this entry will be attempted before moving to the next entry. The
value can be between 0 (i.e. the entry will be ignored) and 5.
• If required, use the large green C (cancel) button to erase the existing
number.
• Use the top corner keypad to add the required number of attempts.
6 Press the
STORE
soft button to save the attempts value and edit the
TIME OUT
period. This is the time (in seconds) that the home unit will allow
to: dial the number and for the respondent to answer the call, listen to your
recorded message and then press the star button on their phone. It is impor-
tant that this value is not too short that the recipient is not given chance to
respond or too long that valuable time is wasted if the called phone number is
engaged, unanswered or unavailable. The standard time is 60 seconds.
• If required, use the large green C (cancel) button to erase the existing time
out period.
• Use the top corner keypad to add the required time out period (the system
will not allow a time out period less than 10 seconds).
The sequence number (0 to 9)
The phone number for sequence 0
Dialling attempts that should
be made to contact this
number before moving to the
next number.
[off screen]
TIME OUT: 60 - The time
in seconds that should be allowed
during each dialling attempt (the
standard setting is 60 seconds).
Press this soft
button to choose
the next sequence
number.