35
2
．
Air connection
：
as Fig.2
，
connect tube C with D (the middle connector), the other side of tube is connected with
one way valve.
10.5.Operation
1
．
When
After tire is mounted, there is much space left between the rim and the tire as Fig.3, when normal inflating is not
workable, quick tire inflating is needed.
Much space left between
rim and
tire
Fig. 3
2
．
How
As
Fig.4-a
，
Let the mouth close to the edge of rim, hold valve body
F
by right hand, hold valve bush
E
by left
hand and push
E
as arrow direction, and you can hear “POP”, the groove is quickly inflated with high pressure air
from the tank, the rim and tire close touched as
Fig.4-b
, then normal tire inflating operation.
Fig. 4
NOTE
：
Please wear eye-glasses, ear-plugs and other personal protective equipment, when operating this
device
10.6.Maintenance
1
．
Regular check safe valve if it is normally working as
Fig.5-a
, when it reach at normal working air pressure
in the tank, hold needle
A
in the safe valve and pull it upward, and you can hear voice of deflation, it suggests the
Summary of Contents for CASC506
