16
Fig.28
⚫
If a tube needs to be installed in the tire, check first for
the possible damages. Round it onto the rim. Make sure
to keep the tube in the right position throughout the
mounting process.
⚫
To install the upper tire bead, place the tire well and
readjust position of the tire bead (same as mount of the
lower tire bead in Fig.28-B. Press down the tire opposite
to the mount/demount head to the rim groove
(Fig.29).
⚫
Depress the pedal D (Fig.22) to turn the turntable while
keeping pressing on the tire. When only 10~15cm is left,
slow down to avoid damage of the tire bead. Stop the
motor if there is any indication for damage. Lift the
pedal D and turn the turntable counter-clockwise. Try
again when the tire is back to the original shape.
⚫
NOTE
：
➢
It is not necessary to move the handle of the
screw every time if the size of rim matches the
tire. Just move the swing arm.
➢
In the process of operation, turntable always
goes clockwise, anti-clockwise is only for
correcting wrong operation
Summary of Contents for CASC506
