Features - meaning of the symbols shown on the label: Please refer to the instructions delivered with the purchased fitting.
D26 - The power supply cable, according to the instructions of the luminaire, must be in neoprene rubber type H07RN-F, diameter between 8 and 11mm,
without earth conductor since the fitting is in Class II double insulation.
D26/MH - The power supply cable, according to the instructions of the luminaire, must be three core neoprene rubber type H07RN-F,
diameter between 9 and 12mm, with earth conductor since the fitting is in Class I insulation.
Quality control: Should you have any complaint please get in touch with our company or its sales organization. Please give the number of your order as well as the
serial number that recognizes the fixture.
installation and maintenance sheet
D26-D26R/E27 - D26-D26R/MH accessories
twin pole mounting
ø
60mm
fixture
mounting height:
any
max wind exposed surface: n° 2 D26/E27= 0,064 m
2
n° 2 D26/MH= 0,076 m
2
n° 2 D26R/E27= 0,048 m
2
n° 2 D26R/MH= 0,060 m
2
total weight:
n° 2 D26/E27= 2,5 Kg
n° 2 D26/MH= 9,6 Kg max
n° 2 D26R/E27= 2 Kg
n° 2 D26R/MH= 4,6 Kg max
D26/P1
single pole mounting
ø
60mm
fixture
mounting height:
any
max wind exposed surface: D26/E27= 0,032 m
2
D26/MH= 0,038 m
2
D26R/E27= 0,024 m
2
D26R/MH= 0,030 m
2
total weight:
D26/E27= 1,2 Kg
D26/MH= 4,7 Kg max
D26R/E27= 1 Kg
D26R/MH= 2,3 Kg max
D26/B fixing base
for wall - ceiling - structure mounting
fixture
mounting height:
any
max wind exposed surface: D26/E27= 0,032 m
2
D26/MH= 0,038 m
2
D26R/E27= 0,024 m
2
D26R/MH= 0,030 m
2
total weight:
D26/E27= 1 Kg
D26/MH= 4,6 Kg max
D26R/E27= 0,8 K
D26R/MH= 2,2 Kg max
D26/PZ
ground spike
for ground mounting
can be used with or without fixing base D26/B
product in compliance with the requirements
of the European Community Directories
'(
'5(
'0+
'50+
¡
¡
'(
'5(
'0+
'50+
'0+
'50+
'0+
'50+
¡
¡
'(
'5(
'0+
'50+
'0+
'50+
'0+
'50+
'(
'5(
'0+
'50+
NB: These assembly instructions must be given to end users for correct maintenance and so that they know how to change the bulb. The appliance must not be tampered with or
transformed and it must be installed and used as supplied and in compliance with the National Rules on Installations. Any non-compliant installations will invalidate all forms of
guarantee. The company cannot be held responsible for damage caused by incorrect assembly.