manualshive.com logo in svg

Cassidian TH1n, User Manual, Page: 28 / 118

Share
Download
Cassidian TH1n User Manual Download Page 28

Y o u r   r a d i o

PS11366AENAA01

TH1n - User Guide

28/115

This document is the property of Cassidian and should not be copied or circulated without permission.

Q

Notifications

The following are explanations for some of the notifications that may appear 
on the display:

•

Not allowed for current access level

 

— 

You do not have access rights to 

perform the action. See Security settings on page 91.

•

No network coverage

 

— 

The radio cannot perform the operation, because 

the radio is not in the network coverage area.

•

Selected group's properties changed

 

— 

The status of the selected talk 

group has changed. To view the details, press 

View

.

•

Unauthorised position request from

 

— 

The radio received a position 

request from an unauthorised number (position information was not sent). 
To view the details, press 

Read

. See Position settings on page 64.

•

Network not allowed:

 

— 

The radio cannot register to the selected network. 

If the network was selected manually, you can attempt to select another 

Displayed during a one-way phone call when neither party 
is transmitting.

Displayed during an express call when neither party is 
transmitting.

Displayed during a call made to your selected group when 
nobody is transmitting. 

Displayed during a call made to a scanned group when 
nobody is transmitting. 

Displayed during normal direct mode calls when no direct 
mode device is available. See Direct mode on page 53.

Displayed during direct mode calls when a compatible 
direct mode gateway is available. See Gateway and 
repeater on page 57.

Displayed during direct mode calls when a compatible 
direct mode repeater is available. See Gateway and 
repeater on page 57.

Polaris_en_print.book  Page 28  Tuesday, October 23, 2012  12:30 PM

Summary of Contents for TH1n























































































































Reviews:

No comments