D a t a c o m m u n i c a t i o n
3. Activate an access point, and change its settings in
Modem settings on page 91.
Q
Connect your radio to a PC
You can connect your radio to a compatible PC using a data cable.
1. Connect the data cable to the serial port on your PC.
2. Connect the cable to your radio.
3. Start using the communication application on your PC. For instructions,
refer to the documentation of the application.
If you use a PC in a vehicle, you can connect your radio to the PC with the
CARK91B car kit and the DLR-3T cable. For details, contact your local dealer.
is displayed during a packet data connection. If there is an incoming or
outgoing call, packet data transfer is suspended, and
is displayed instead.
Making or answering phone calls during a PC connection is not
recommended, as it might disrupt the operation.
For better performance during packet data connection, place the radio on a
stationary surface, with the keypad facing downward as far from the PC as the
cable permits. Do not move the radio by holding it in your hand during a
packet data connection.
Polaris_en_print.book Page 109 Tuesday, October 23, 2012 12:30 PM