28
29
Catalogue
D
Doctor Fly 120
(complete)
Code DOCTOR 120
Maintenance
Washing Doctor Fly 120
After each work day, wash thoroughly with water the circuit and the
tank, to prevent the system becoming clogged.
Open the cover to wash the circuit Fill the tank with water, set
Komandante in MAN mode and press the button until clean water
comes out.
Drain residual water with the tank drain cap.
Cleaning the solenoid valve
See the solenoid valve specification and components on page 19.
Since the solenoid valve may become clogged, remove and clean
it thoroughly any time it is necessary. To do so: remove the fitted
solenoid (1), unscrew the bulb (2) by 90° until it clicks, using a pair of
pliers, then thoroughly clean the inside of the solenoid valve. Finally
reassemble all components carefully.
