18
19
1
SOLENOID VALVE
Specification:
12V, 2 outputs, 8 bar, Q=4.5 l/min, 1/4” fittings
• Bayonet sleeve, patented system to allow quick manual inspection of the pilot.
• Rubber reel holder, elastic ring ensuring the reel can be secured without any
equipment.
• High-precision mechanical machining to achieve the a very low level of
roughness to limit scaling.
• High corrosion resistance due to the low magnetic residue STAINLESS steel
internal gears specifically designed for solenoid valves.
• Operating ambient temperature between -10°C and +50°C;
• Fluid temperature between -10°C and +130°C;
Materials used:
• Brass body CW617N (EN 12165)
• STAINLESS steel internal gears
• AISI 303 STAINLESS steel sleeve (EN 10088-3)
• FPM (Viton), NBR, EPDM, silicone seal materials.
Doctor Fly 120 technical data
Solenoid valve
Dimensions
70 x 80 x h 120 cm
Weight
60 kg
Flow rate per minute
25 l/min
Pressure
25 bar
Operating pressure
3 to 8 bar
Voltage
12 V
Current absorption
8 A
Noise level
Less than 70 dB
2
CENTRAL CORE
Technical information
B
6) FC8 (Aquilotto)
This does not apply to Doctor Fly
In the event of a malfunction of the flow meter (see the faults on
page 24) the Tm (timed) or TmT (automatic timed) mode allows
continuing work while waiting for the flow meter to be repaired
or replaced.
Plant counter
Press the plant counter button
to display the number of spots that were sprayed.
Remember to reset the counter (with the relevant button on the display) before
starting treatment.
fc8 0.95
