Caso EO 27, Operating Manual

Page: 64 / 180

caso EO 27 64
13.4.2 Installing:
•
Inspect the connection with the power source. Check and
ensure a current of 16A from this power source. A special
junction box must be provided and connected by a qualified
person.
•
You can switch off the power of the oven after installation for
maintenance purposes. The disconnection may be achieved
by having the plug accessible or by incorporating a switch in
the fixed wiring (in accordance with the wiring rules).
•
Carpentry: Refer to figure 1 or 2 for the appliance dimensions
to your oven, and the space necessary to install the oven.
The oven support surface must be solid plywood or similar
material, and the surface must be horizontal from side to
side, left to right and front to rear.
Please note
In order to ensure adequate ventilation, the back panel of the
cabinet unit must be removed. There must be an aperture of at
least 50 mm between the oven back and cabinet back.
If the oven is mixed with a different kitchen range, it must
observe the rules which are provided by the manual of the
kitchen range.