Commissioning
caso CM1000
49
13.5 Setup
13.5.1
Setup location requirements:
In order to ensure the safe and trouble-free operation of the
device, the setup location must fulfil the following prerequisites:
The device must be set up on a firm, flat, horizontal and heat-
resistant surface with sufficient load-bearing capacity for the
oven and the maximum weight of the expected food that is to
be prepared in the oven.
Choose the setup location in such a way that children cannot
reach any hot surfaces on the device.
The device is not intended to be installed in a wall or a built-in
cupboard.
Do not set up the device in a hot, wet or extremely damp
environment or near flammable material.
The device requires an adequate flow of air in order to operate
correctly. Leave a clearance of 10 cm above the oven.
Do not cover up any openings on the device and do not block
these off.
Do not remove the device’s adjustable feet.
The electrical socket must be easily accessible so that the
power lead can be disconnected easily, in the case of an
emergency.
The installation and assembly of this device in non-stationary
setup locations (e.g. on ships) must be carried out by specialist
companies / electricians, provided they guarantee the
prerequisites for the safe use of this device.
