CASO DESIGN VRH 490 advanced, Instruction Manual

Page: 36 / 118

36
15.7 Electrical connection
In order to ensure the safe and trouble-free operation of the device, the following
instructions must be observed for the electrical connection:
•
Before connecting the device, compare the connection data (voltage and frequency) on
the rating plate with those of your electrical network. This data must agree in order that
no damages occur in the device.
If in doubt, ask your qualified electrician.
•
Make sure that the power cable is undamaged and has not been installed under the
oven or over hot or sharp surfaces.
•
The electrical safety of the device is only guaranteed if the device is connected to a
properly installed protective conductor system. Operations using an electrical outlet
without a protective conductor are prohibited. If in doubt, have the house installation
checked over by a qualified electrician.
The manufacturer cannot be made responsible for damages that are caused by a
missing or damaged protective conductor.
16
Complete Overview
This chapter provides you with an overview of your vacuum sealer and explains some of
its key features.