73
E
To perform constant calculations
}
1. Enter the Calculator Mode.
3
2
2. Enter the calculation, pressing the arithmetic operator
key twice. This will causes the “
K
” indicator to appear on
the display to indicate a constant calculation.
•
You can use this constant calculation technique for
addition, subtraction, multiplication, and division.
u
3. Press
&
to display the initial result (in this case, 5).
u
4. Press
&
again to add 3 to the result (in this case, 5 + 3
= 8).
•
You can repeat the above operation as many times as
you like. Each time you press
&
, the previous result
obtained is added to, subtracted from, multiplied by, or
divided by the value to the left of the arithmetic operator.
•
To clear a constant calculation, press
AC
.
To correct errors in calculations
If you enter a wrong value, press
C
and then enter the correct value.
If you press the wrong arithmetic operator key (
!
,
@
,
#
,
$
), simply press the
correct key before entering anything else.
About calculation errors...
Whenever an error occurs, the indicator “
E
” appears on the display.
E
‰.
Using the Calculator
