PART 3
Data Management Functions
E
36
To insert a new Memo Mode data item between two items in
memory
1. Enter the Memo Mode.
2. Recall the data item you want to come after the new data item you are about
to input, and move the name of the data item into the top line of the display.
(See “Recalling data stored in memory” on page 55)
3. Input the new data item.
4. Press
SHIFT ENTER
to store the new data item.
•
If you press
ENTER
without pressing
SHIFT
, the new data item is automati-
cally stored at the end of the data already existing in memory.
Where to find other information
•
For information on searching for and recalling data already stored in
memory, see “Recalling data stored in memory” on page 55.
•
For information on editing, deleting and copying data already stored in
memory, see “Editing, Deleting and Copying data” on page 57.