PART 3
Data Management Functions
E
42
Using Schedule Alarms
You can set schedule alarms for Schedule Keeper data entries to help you keep
on time for important appointments.
To set a schedule alarm when inputting data
1. Enter the Schedule Keeper and input data, using the procedures described
in steps 1 through 4 under “To input Schedule Keeper data’’ on page 41.
2. Whenever the prompt “
ALARM?
” is flashing on the display, input the schedule
alarm time. Use the
J
and
H
cursor keys to move between the hour and
minutes
set
ting.
1/NOV/2003 SAT
WORK
08:00AM - 10:00AM
ALARM: 07:45AM
•
Whenever the schedule alarm setting is flashing on the display, press
DEL
to clear the alarm time and display the prompt “
ALARM?
”. Input the alarm
time using the same procedure described above.
3. After inputting the data, press
ENTER
to store it into memory.
•
If you attempt to set a schedule alarm time that is already set for another data
entry, the message “
ALARM TIME ALREADY USED OR PASSED!
’’ ap-
pears on the display. Then the data is stored without a schedule alarm.
•
If you attempt to set a schedule alarm time that is already passed, the
message “
ALARM TIME ALREADY USED OR PASSED!
’’ appears on
the display. Then the data is stored without a schedule alarm.
Schedule alarm
time
Time data