EN-72
Configuring Digital Piano Settings
Chorus Edit
Chorus Type
Selects the chorus type.
Chorus1, Chorus2, Chorus3,
Chorus4, FB Chorus, Flanger1,
Flanger2, Flanger3, Flanger4,
Short Delay1, Short Delay2,
Short Delay3, Short Delay4,
Soft Chorus, Bright Chorus,
Deep Chorus
LFO Rate
Adjusts the LFO rate.
0 to 127
LFO Depth
Adjusts the LFO depth.
0 to 127
Feedback
Adjusts the feedback amount.
0 to 127
Tone
Adjusts the tone.
0 to 127
Delay Time
Adjusts the delay time.
0 to 127
Delay Send
Adjusts the send level to system delay.
0 to 127
Reverb Send
Adjusts the send level to system reverb.
0 to 127
Return
Adjusts the return level.
0 to 127
Delay Edit
Delay Type
Selects the delay type.
Short 1, Short 2, Echo,
Short Tempo, Mid Tempo,
Long Tempo
Time
Adjusts the total delay time.
0 to 127
Feedback
Adjusts the feedback amount of the center channel.
0 to 127
High Damp
Adjusts the high-range damp. A smaller number increases
damping.
0 to 127
Ratio L
Adjusts the ratio of the left channel relative to the total delay
time.
0 to 127
Ratio C
Adjusts the ratio of the center channel relative to the total
delay time.
0 to 127
Ratio R
Adjusts the ratio of the right channel relative to the total delay
time.
0 to 127
Level L
Adjusts the level of the left channel.
0 to 127
Level C
Adjusts the level of the center channel.
0 to 127
Level R
Adjusts the level of the right channel.
0 to 127
Tempo Sync
Specifies how the actual total delay time is synced with tempo.
Off: Uses Delay Time value.
1/4 to 2: Uses value in accordance with number of beats.
Off, 1/4, 1/3, 3/8, 1/2, 2/3, 3/4,
1, 4/3, 3/2, 2
Reverb Send
Adjust the send level to system reverb.
0 to 127
Return
Adjusts the return level.
0 to 127
Master Comp Edit
Threshold
Adjusts the threshold (where application of an effect starts)
level. Set a lower value for a compressor effect, and a higher
value for a limiter effect.
0 to 127
Ratio
Adjusts the compression ratio. Set a lower value to for a
compressor effect, and the maximum value to for a limiter
effect.
0 to 127
Level
Adjusts the output level.
0 to 127
Attack
Adjusts the time until the compression effect starts. A smaller
value causes prompt compressor operation, which suppresses
the attack of the input signal. A larger values delays
compressor operation, which causes the attack of the input
signal to be output as-is.
0 to 127
Item
Description
Setting
PX560-ES-1A.indd 74
2015/06/18 14:53:53
