Casio KL-70E, User Manual

Page: 20 / 25

E-19
3. Remove the tape cartridge.
4. Use a cotton swab dipped in alcohol to clean
the printer head and roller as shown in the illus-
tration.
5. Replace the tape cartridge and close the back cover.
Initial Power On Settings
The following are the initial settings of the Label Printer whenever you turn it
power on.
Initializing the Label Printer
If you experience serious malfunction of the Label Printer or if operation fails
completely, try performing the following operation to initialize the printer.
Important!
•
Initializing the Label Printer deletes all memory contents. Make sure you have
a back-up copy of text stored in memory if you need it.
Item Power On
SIZE JUST (2
×
2)
EFFECT CANCEL
MIRROR OFF
M-FEED NO
6mm OFF
INT?
To initialize the Label Printer
1. Turn power off.
2. While holding down the
PRINT and ESC keys,
press ON to turn power on.
3. Keeping PRINT and ESC held down, release
the ON key only.
•
This prompt confirms whether or not you want to
initialize the Label Printer.
4. Press SET to initialize the Label Printer or ESC to abort the reset operation.
•
The following table shows the initial settings.
Troubleshooting
•••••
Power Supply
Nothing appears on the display.
Possible Cause Action
Low batteries
Batteries loaded incor-
rectly
AC adaptor is not con-
nected correctly.
Replace batteries.
Remove batteries and reload them correctly.
Make sure the AC adaptor is connected cor-
rectly.
Printer head
Roller
Item
Display
Memory
SYMBOL
EFFECT
M-FEED
MIRROR
MEMO
DENSITY
6mm
CURRENCY B
FORMAT
ROUND
Reset
Cleared
Cleared
,
CANCEL
NO
OFF
STR?
3
OFF
1
2