Casio IT-800 Series, Software Manual

Page: 89 / 325

89
Setting for Scanning Bar Codes
For each symbology, parameters that can define the scanning performances are specified with its
individual symbology name in the section name. See
3
Table 2.64.
Table 2.65
Item Description Setting
[Symbology] Section
Enable Sets up “Enable” or “Disable” for scanning a
symbology. 0; disable, 1; enable
Min Specifies the minimum no. of digits for scanning
a symbology.
Max Specifies the maximum no. of digits for scanning
a symbology.
Output Start/Stop Code Sets up “Enable” or “Disable” for output of start
and stop codes. 0; disable, 1; enable
Read On Check Char
Read On Check Digit Sets up “Enable” or “Disable” for scanning a
symbology with check character. 0; disable, 1; enable
Output Check Char
Output Check Digit Sets up “Enable” or “Disable” for output of check
character. 0; disable, 1; enable
Read On 2 Check Digit Sets up “Enable” or “Disable” for scanning a
symbology with 2-digit check character. 0; disable, 1; enable
Full ASCII Sets up “Enable” or “Disable” for output of Full
ASCII conversion. 0; disable, 1; enable
Only Carrier Message Sets up “Enable” or “Disable” for output of
carrier message only. 0; disable, 1; enable
Append 2Digit Addon Sets up “Enable” or “Disable” for output of
2-digit addon data. 0; disable, 1; enable
Append 5Digit Addon Sets up “Enable” or “Disable” for output of
5-digit addon data. 0; disable, 1; enable
Request Addon Sets up “Enable” or “Disable” for scanning a
symbology only with addon data. 0; disable, 1; enable
Separate Addon Sets up “Enable” or “Disable” for output addon
data separated with space. 0; disable, 1; enable
Output System Number Sets up “Enable” or “Disable” for output of
system number. 0; disable, 1; enable
Expand Version E Sets up “Enable” or “Disable” for output of
12-digit expanded UPCA symbology. 0; disable, 1; enable