manualshive.com logo in svg

Casio IT-800 Series, Software Manual, Page: 223 / 325

Share
Download
Casio IT-800 Series Software Manual Download Page 223

 

223

 

Identification Tab 

This tab displays the following identification data for the WAN module and the SIM card. 
 

 

Figure 3-85 

 

Vendor 

This displays the name of the WAN module manufacturer. 

 
Module 

This displays the model number of the WAN module. 
 

Revision 

This displays the GSM/GPRS module revision number.   
 

IMEI 

This displays the telephone’s unique number (International Mobile Equipment Identity).   
 

IMSI 

This displays the subscriber’s identifier (International Mobile Subscriber Identity). The number is 
shown as “---” when the SIM lock is enabled.   
 

MSISDN 

This displays the telephone number (Mobile Subscriber ISDN Number). The number is shown as 
“---” when the SIM lock is enabled.   

Summary of Contents for IT-800 Series






































































































































































































































































































































Reviews:

No comments