manualshive.com logo in svg

Casio IT-800 Series, Software Manual, Page: 309 / 325

Share
Download
Casio IT-800 Series Software Manual Download Page 309

 

309

 

Display Range Settings screen 

Use the Display Range Settings screen to specify the range of logs on the terminal to be loaded.   

 

 

 

No. 

Item  

Contents  

1  

Today 

Only display today

’

s logs. 

2  

Yesterday  Only display yesterday

’

s logs. 

3   

All 

Display all logs on the terminal. 

4   

Period 

Specify the period for display. 

5   

Start date  This applies to period specification. Specify the start date of the period 

in the format YYYYMMDD. 

6   

End date 

This applies to period specification. Specify the end date of the period in 

the format YYYYMMDD. 

7   

Set 

Enable setting content and display the list screen. 

8   

Cancel 

Discard the settings and, if this is the startup screen, terminate the 
command. If this is displayed from the List screen, go back to that 

screen. 

 

Summary of Contents for IT-800 Series






































































































































































































































































































































Reviews:

No comments