manualshive.com logo in svg

Casio IT-10 Series, User Manual, Page: 17 / 63

Share
Download
Casio IT-10 Series User Manual Download Page 17

15

●

Cautions when carrying the Rugged PDA

・

Do not put the Rugged PDA into the hip pocket of your trousers and then sit
down. Doing so may break it and cause a malfunction.

・

Do not carry Rugged PDA around in a bag containing hard objects with protru-
sions. If these objects bump against Rugged PDA or force is applied from above,
the display may be scratched or Rugged PDA may malfunction.

・

Before moving Rugged PDA, be sure to shut down the power, and make sure that
all peripheral devices are disconnected. Then, move Rugged PDA separately from
these devices. Carrying devices around holding them by their connector cables
may cause cables to break or devices to malfunction.

・

When carrying Rugged PDA around or when Rugged PDA is not used, shut down
the power, and put it in a protective case, for example, to prevent the display from
being scratched.

●

Periodically back up data stored on the Rugged PDA.

We recommend periodically writing down or transferring data (transfer data with
ActiveSync) to a personal computer to create a backup of important data. Data
may be lost in the following situations.

・

If the battery is completely depleted.

・

If incorrect operations are done.

・

During repairs to correct a malfunction.

●

Options

Non-CASIO options

・

Check with each manufacturer for compatibility before using any non-CASIO
options with this unit.

・

CASIO assumes no responsibility for any loss (including but not limited to per-
sonal injury, material loss, damage to Rugged PDA) suffered by you or other
arising out of the use of a non-CASIO option.

Use Only as Directed

・

Be sure to connect or disconnect an option only as expressly directed in the
documentation that comes with the option.

・

Incorrect use of options can cause malfunction and serious damage to Rugged
PDA, which can required extensive repair work to correct.

 DT-10̲06-18.p65

04.9.30, 17:27

Page 15

Adobe PageMaker 6.5J/PPC

Summary of Contents for IT-10 Series
































































Reviews:

No comments