Casio FA-B30 User Manual Download

Page: 25 / 68

Configure

Font

Width

Length

, and

Layout

settings.

• Your settings will be reflected in the preview window, so you can see what your

printed label will look like.

• If you have

Auto

selected for

Layout

, the size of text will be adjusted automatically

so it fits within the specified tape length. If you have

Title

specified for

Layout

the first line will be middle size, while all remaining lines will be small size text.

• The tape length setting is ignored when you are printing to thermal roll paper.
• To specify a fixed-length tape, select the

Fixed

check box. The length of the

tape changes automatically in accordance with the text when this check box is
cleared.

• Note that some settings may not be available when using a label printer model

that does not support them.

Check to make sure the Label Printer is connected correctly to your
computer.

You can connect the Label Printer to your computer any time before you click the

Print

button in step 6.

Specify the number of copies and margin size.

Some Label Printer models do not support variable margin settings.

Click the

Print

button.

• This causes a confirmation message to appear.
• If you do not have the preview window displayed along with the Input Panel, the

preview dialog box will appear at this time.

Preview window

Layout

Fixed

Length

Print

Button

Copies

Margins

Printer

Text Input Box

Font

Width

Summary of Contents for FA-B30





































































Search results

Summary of Contents for FA-B30

Reviews:

Related manuals for FA-B30

Brands by name

Popular brands

Casio FA-B30, User Manual

Search results

Summary of Contents for FA-B30

Reviews:

Related manuals for FA-B30

Brands by name

Popular brands