95
PLAYBACK
Playing Back a Voice Recording File
(EX-M20 Only)
Perform the following steps to play back a voice recording
file.
1.
In the PLAY mode, use [
"
] and [
!
] to display
the voice file (a file with
on it) you want to
play.
2.
Press [SET].
•
This starts playback of
the voice recording file
through the camera
’
s
speaker.
•
You can perform the
following operations
while audio is playing.
To do this:
Fast forward or fast reverse
the audio
Pause and unpause audio
playback
Adjust audio volume
Cancel playback
Do this:
Hold down [
"
] or [
!
].
Press [SET].
Press [
#
] or [
$
].
Press [MENU].
IMPORTANT!
•
Keep the microphone on the
front of the camera pointed at
the subject.
•
Take care that you do not
block the microphone with
your fingers.
•
Good recording results are not possible when the
camera is too far from the subject.
•
Operating camera buttons during recording can
cause button noise to be included in the audio.
•
The
(Audio) icon appears on the monitor screen
after audio recording is complete.
•
You will not be able to record audio when remaining
memory capacity is low.
•
The following types of audio recording are not
supported.
—
Adding audio to a movie image
—
Adding audio to a protected snapshot (page 100)
•
Audio that is re-recorded or deleted cannot be
recovered. Make sure you no longer need audio
before re-recording or deleting it.
Microphone
