manualshive.com logo in svg

Casio EX-M20 - EXILIM Digital Camera, User Manual

Share
Download
Casio EX-M20 - EXILIM Digital Camera User Manual Download Page 35

GETTING READY

33

•

Should you ever notice leakage, strange odor, heat
generation, discoloration, deformation, or any other
abnormal condition while using, charging, or storing a
battery, immediately remove it from the camera or
optional charger unit and keep it away from open flame.

•

If the battery does not achieve full charge after the
normal charging time has passed, stop charging.
Continued charging creates the risk of overheating, fire,
and explosion.

•

Battery fluid can damage your eyes. Should battery
fluid get into your eyes accidentally, immediately rinse
them with clean tap water and then consult a physician.

•

Be sure to read page 28 of this User

’

s Guide and the

instructions that come with the optional charger unit
before using or charging the battery.

•

If the battery is to be used by young children, make
sure that a responsible adult makes them aware of the
precautions and proper handling instructions and make
sure that they handle the battery correctly.

•

Should fluid from the battery accidentally get onto
clothing or your skin, immediately rinse it off with clean
tap water. Prolonged contact with battery fluid can
cause skin irritation.

●

PRECAUTIONS DURING USE

•

The battery is designed for use with this CASIO digital
camera only.

•

Use only the USB cradle that comes with the camera or
the specified optional charger unit to charge the
battery. Never use any other type of charger unit for
charging.

•

A new battery is not charged. Be sure to charge the
battery before using it for the first time.

•

Use of a battery in cold environments shortens the
operating time you can expect on a full charge. Charge
the battery in a location where the temperature is in the
range of 10

°

C to 35

°

C  (50

°

F to 95

°

F). Charging

outside this temperature range can cause charging to
take longer than normal or even cause charging to fail.

•

Very limited operation following a full charge indicates
that the battery has reached the end of its service life.
Replace the battery with a new one.

•

Never wipe the battery with thinner, benzene, alcohol,
or other volatile agents or chemically treated rags.
Doing so can cause deformation of the battery and lead
to malfunction.

Summary of Contents for EX-M20 - EXILIM Digital Camera






























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands