79
PLAYBACK
Playing an Audio Snapshot (EX-M20 Only)
Perform the steps below to display an audio snapshot
(indicated by a
indicator) and play its audio.
1.
In the PLAY mode, use [
"
] and [
!
] until the
image you want is displayed.
2.
Press [SET].
•
This plays back the
audio that accompanies
the displayed image.
•
You can perform the
following operations
while audio is playing.
IMPORTANT!
•
Audio volume can be adjusted only when playback is
being performed or is paused.
•
When you have the LCD remote controller connected
to the camera, audio is output through the stereo
headphones (page 160) instead of the camera
’
s
speaker. Output through the headphones is
monaural.
•
The volume of audio recorded with the camera
cannot be adjusted using the LCD remote controller.
Use the camera
’
s controller to adjust volume level in
this case.
To do this:
Fast forward or fast reverse
the audio
Pause and unpause audio
playback
Adjust audio volume
Cancel playback
Do this:
Hod down [
"
] or [
!
].
Press [SET].
Press [
#
] or [
$
].
Press [MENU].
