manualshive.com logo in svg

Casio EX-M20 - EXILIM Digital Camera, User Manual

Share
Download
Casio EX-M20 - EXILIM Digital Camera User Manual Download Page 86

84

PLAYBACK

Playing a Movie

Use the following procedure to play back a movie that was
recorded in the movie mode.

1.

In the PLAY mode,
press [

"

] and [

!

] to

scroll through images
until the movie you
want to play is
displayed.

2.

Press [SET].

•

This start playback of the movie.

Movie icon

 IMPORTANT! 

•

Cropping an image creates a new file that contains
the cropped image. The file with the original image
also remains in memory.

•

An image recorded using the 1600 x 1072 (3:2) pixel
size cannot be cropped.

•

Movie and voice recording file images (EX-M20 only)
cannot be cropped.

•

An image recorded using another camera model
cannot be cropped.

•

If the message 

“

This function is not supported for this

file.

”

 appears, it means that the current image cannot

be cropped.

•

The cropping operation cannot be performed if there
is not enough memory to store the cropped image.

Summary of Contents for EX-M20 - EXILIM Digital Camera






























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands